Retractor/Users manual
32
6-4 Release of the ratchet device (ERM-4S, ERM-6S, ERM-8S)
If the fall-arrest device is activated due to an over reduction of tension, turn about 10 turns to “+”
direction (clockwise) while the tool (equipment) is attached. Then fall-arrest device will be released.
6-5 Replacement of the tools (equipment)
WARNING
Do not move directly under the tool (equipment) suspended from the retractor.
Do not remove tools (equipment) with the wire rope pulled out. The wire rope may
be quickly wound up, causing an injury.
NOTICE
Adjust the spring tension before the operation
1
Confirm that the tool (equipment) can be moved up and down.
2
Lift the tool and wind the wire rope completely inside the drum. Remove the tool (equipment).
3
Install the tool (equipment) and adjust the spring tension in accordance with “5-2-2 Installation
of tools (equipment) and adjustment of the spring tension”
6-6 Periodical inspections
Perform an inspection at least once per month.
If the product is used in an unfavorable environment or used frequently, reduce the interval between the
inspections.
For the method of the periodical inspections, download “Repair Manual” from our website and refer to
“0-0 Periodical inspections” in “Repair Manual”.
http://www.endo-kogyo.co.jp
Stop by fall arrest
device
The tool fall
Release with
turn 10 turns to
“+” direction
Copied
digital
data
from
http://www.endo-kogyo.co.jp/
