Retractor/Users manual
26
4-6 Applicable standards
Machinery (Directive 2006/42/EC
）
EN ISO 12100
：
Safety of machinery. General principles for design. Risk assessment and risk reduction
* Note: Only the standard specification of this product complies with the standards. If the product is
used in combination with non-standard parts or modified by the customer, the standards may no
longer be complied with. Please note this in advance.
5.
Installation
WARNING
Install the retractor correctly in accordance with the descriptions in this manual.
Incorrect installation may cause an injury, property damage, or damage to the
Retractor.
Be sure to attach an auxiliary wire rope or chain to the retractor to protect workers
in case the top hook or the support member (metal hanger) for the retractor should
be damaged.
CAUTION
The installation should be performed by a maintenance operator who has developed
sufficient knowledge and operating skill for the retractor.
5-1 Preparation and checks before installation
5-1-1 Tools and equipment for installation
All of the following items must be prepared by the customer.
Support members (metal hangers)
Allen key(6mm)
Auxiliary wire rope or chain
5-1-2 Check of installation location
Before installing the product, check that the installation location does not have any of the following
problems.
1
Check that the support members have a sufficient strength.
2
Ensure that sufficient space for performing maintenance, including the adjustment of the spring
tension, is available on a side of the main equipment.
3
Ensure that adequate work space is available around the main equipment.
4
Check that the installation location has the installation environment described in “4-2 Operating
environment”.
5
If a trolley is used, attach a carabiner.
6
Check that there are no sharp edges in the installation location.
Copied
digital
data
from
http://www.endo-kogyo.co.jp/
