![background image](http://html1.mh-extra.com/html/empire-comfort-systems/op36fp32m-3/op36fp32m-3_installation-instructions-and-owners-manual_2403962020.webp)
33858-1-0615
Page 20
Figure 20 - Millivolt Wiring
(OPTIONAL) WALL SWITCH
(OPTIONAL) REMOTE CONTROL RECEIVER
OFF ON SWITCH
THERMOPILE
OFF
ON
BLACK
BLACK
IF ANY OF THE ORIGINAL WIRE AS SUPPLIED WITH THIS UNIT MUST BE
REPLACED, IT MUST BE REPLACED WITH NO. 18, 150ºC WIRE OR ITS
EQUIVALENT
WIRING
Figure 21 - IP Wiring
MAIN
PILOT
Learn
MOTOR
COMM.
POWER
IPI
Remote/Off
S
I
ADJ.
(GND)
HI/LO
Solenoid
ORANGE
(IGNITOR)
BLACK
(SENSOR)
BLACK
ORANGE
GREEN
WHITE
BROWN
SPARKER
GAS CONTROL
VALVE
ELECTRONIC
CONTROL MODULE
AF-4000 B/P
RED
BLACK
BLACK
BROWN
RED
ORANGE
N/A
CUSTOMER PROVIDED
WALL SWITCH
RED
BLACK
NOTICE:
Do not connect 120V to this unit.
NOTICE
for IP fireplaces only:
The fireplace may be operated
without the remote by connecting the brown control module wires
to a wall switch. The remote/off switch on the control module
must be in the "OFF" position.
NOTICE:
For remote use, slide switch on battery box to "ON"
position.
Label all wires prior to disconnection when servicing controls.
Wiring errors can cause improper and dangerous operation.
Verify proper operation after servicing.
Millivolt thermopile is self-powered. The gas valve does not
require 120 volts. Maximum length of 20 ft of 16 AWG to
conductor wires is to be used with all optional switches.
Use the two leads (Red and Green) to attach optional controls.