35919-4-1015
Page 8
FBB10 BLOWER KIT INSTALLATION (OPTIONAL)
BENCH INSTALLATION (BEFORE INSTALLED IN WALL)
1. With Power completely turned off, remove plate and four
screws from left panel.
See Figure 1.
Figure 1
2. Install the blower onto the pre-bent brackets on the blower
plate. Ensure the Velcro connects to secure the blower in
place.
See Figure 2.
Back side of Blower
showing Velcro
Figure 2
3. Route wiring through opening created in Step 1.
4. Secure blower assembly into place per step 2 with velcro.
5. Install thermo disc by snapping into valve bracket burner
assembly.
See Figure 3.
Figure 3
6. Connect Power source into outlet on the bottom right side of
the appliance.
BLOWER INSTALLATION
(AFTER INSTALLED IN WALL)
1. Make sure power is turned off prior to any removal. Lift
screen and pull away from the unit.
See Figure 4.
Figure 4
2. Undo two latches at bottom of firebox assembly.
See Figure
5.
Figure 5
