Emerson Rosemount 753R, Reference Manual

Page: 38 / 60

Reference Manual
00809-0100-4379, Rev AA
March 2006
Rosemount 753R Indicator
5-2
• Alert - Indicates any current alert notifications attributable to a specific
wireless indicator tag name, which can be viewed by clicking on the
highlighted value for detailed alert information.
• Battery Voltage - Current voltage level of the wireless indicator’s
battery.
• RSSI - Radio Signal Strength Indicator - Shows the strength of the
radio signal reception at the specific device location.
• Received Time - Shows the time that the data was received.
Figure 5-1. Summary Report
753R DB Overrun
Buffer memory exceeded
capacity
No action required
Slave Device
Disconnected
Transmitter not reporting to
753R
Check connections and/or
HART™ address
Slave Device Malfunction
Slave device is reporting a
malfunction
Replace HART™ transmitter,
refer to HART™ device manual
for corrective action
Slave Device
Configuration Error
Alert unit mis-match or device
address mis-match
Check Alert units and/or see
device replacement instructions
Discrete Output Active
Alert has caused the DO to be
activated
No action required
Button Error
Button event active or in
process
No action required
Slave Device Saturated
HART transmitter saturated See device manual or check
process
Data Packet Checksum
Error
Data associated with a packet
implies an error; could be
corrupted
If error persists, call RCC
753R Power Always On
Device in Power Always On
mode
If desired mode, no action
required. If not desired, change
power mode.
Table 5-1. Status Messages
75
3/
S
U
M
M
A
R
Y
_0
1A
A
.T
IF