manualshive.com logo in svg

Emerson Rosemount 753R, Reference Manual

Share
Download
Emerson Rosemount 753R Reference Manual Download Page 29

Reference Manual 

00809-0100-4379, Rev AA

March 2006

Rosemount 753R Indicator

www.rosemount.com

Section  4

Web Interface-Configuration and 

Maintenance

Overview  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-1

Device Configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-1

Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-2

Alert  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-3

Query Request   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 4-4

E-Mail Notification   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-5

General   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 4-6

Discrete Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-7

Discrete Input  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-7

Master Reset  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-7

OVERVIEW

This section contains information on configuration of the 753R indicator. Full 

device configuration is performed via the iTraX

®

 web interface. 

DEVICE 

CONFIGURATION

The device configuration section of the iTraX

®

 website allows you to select the 

particular device tag you wish to configure through a pull-down menu. To 

access the device configuration, click the device on the left menu.

Once you have selected the device you wish to configure, the following 

configuration options are available:

• Measurement - Change the device tag name; Set device 

measurement parameters; Set transmission parameters; Enter an 

e-mail address to receive a configuration acknowledgement.

• Alerts - Set alert parameters; Define effective and expiration dates; 

Configure e-mail settings to receive electronic alert notification.

• Query Request - Request configuration from a transmitter at the next 

transmission.

• E-mail Notification - Establish e-mail addresses that will receive 

electronic data transmissions during device operation.

• General - Configure settings related to the physical device; Enter an 

e-mail address to receive a configuration acknowledgement.

• Discrete Output - Set discrete output parameters; Enter an e-mail 

address to receive a configuration acknowledgement.

• Discrete Input - See factory for availability.

• Master Reset - Perform a master reset of selected device tags; Enter 

an e-mail address to receive a configuration acknowledgement.

Figure 4-1. Device Configuration

75

3_

02

_A

A

.T

IF

Summary of Contents for Rosemount 753R





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands