Emerson Rosemount 753R, Reference Manual

Page: 35 / 60

Reference Manual
00809-0100-4379, Rev AA
March 2006
4-7
Rosemount 753R Indicator
DISCRETE OUTPUT
Discrete Output functionality is only available when the Rosemount 753R is
ordered with the Y1 Discrete I/O option.
To configure the Discrete Output settings of selected Tags, follow these steps:
1. DO Mode - Toggle this setting to Enable or Disable the Discrete Output
option
2. DO Trigger Alert - Set the alert that will trigger Discrete Output.
3. DO Direction - The DO Direction can be set to Low>High or High>Low
(see Alert on page 4-3 for more information).
4. Acknowledgement E-mail - Enter an e-mail address to receive an
acknowledgement of the changes to the discrete output configuration
settings, if desired.
5. Submit - After choosing all settings, click Submit to activate.
Example: The following example shows configuration for the Discrete Output. It shows
that DO Mode is enabled, DO Trigger Alert is Low Level (Disabled), and the
DO Direction is Low>High.
Figure 4-7. Discrete Output
Configuration
DISCRETE INPUT
See factory for availability.
MASTER RESET
The iTraX
®
Master Reset option performs a “reboot” of the selected wireless
indicators directly from the website. The reboot will occur at the next
scheduled transmission.
To activate a master reset operation:
1. Acknowledgement E-mail - Enter an e-mail address to receive an
acknowledgement of the Master Reset.
2. Submit - Click Submit to activate the master reset.
75
3_
04
_A
A
.T
IF