Emerson Rosemount 753R, Reference Manual

Page: 34 / 60

Reference Manual
00809-0100-4379, Rev AA
March 2006
Rosemount 753R Indicator
4-6
GENERAL
The general configuration settings let the user change the following settings:
• Button Event Time-out - Sets the time, in seconds, that the local LCD
screen displays data when the local user interface button has been
pressed.
• Power Mode - Toggle the power mode of the wireless indicator
between two settings:
• Normal - The wireless indicator is maintained in a power-saving sleep
mode until it is powered up to perform an operation. After operation,
the wireless indicator returns to the sleep mode. This setting is best
when the device is powered locally with a Remote Power Supply
(RPS).
• Always On - The wireless indicator is in constant power mode (does
not enter a sleep mode when not operating). This power mode should
only be used for devices that are line powered through a continuous
power supply.
NOTE
When used with the RPS, Always On mode will deplete the battery at a higher
rate than normal.
• Acknowledgement E-mail - Enter an e-mail address to receive an
acknowledgement of the changes to the general configuration settings,
if desired.
• Submit - After all settings have been chosen, click Submit to activate
the settings.
Example: The following example shows the General Configuration settings. Button
Event Time-out is set to 30 min. in normal Power Mode.
Figure 4-6. General
Configuration
75
3_
03
_A
A
.T
IF