Emerson Rosemount 5600 Series, Reference Manual, Page: 41 / 128

41
Reference Manual
00809-0100-4024, Rev CA
Mechanical Installation
March 2020
Mechanical Installation
2. Make a small recess in the flange hole.
Figure 2-32. Recess Hole
3. Put the O-ring on the flange and insert the flange ball into the hole. Make sure the pin on the side of
the flange ball fits into the corresponding recess on the flange.
Figure 2-33. Put the O-ring on the Flange
4. Tighten the nut. Make sure the flange ball fits tightly to the flange.
5. Secure the nut by tightening the locking screw.
Figure 2-34. Secure the Nut
50
O96
6-30
R3
Recess
3.78
(96)
0.24-1.18
(6-30)
1.97
(50)
Flange ball
O-ring
Nut
Locking screw