Emerson Liebert DS Series, User Manual

Page: 60 / 167

Disassembling the Liebert DS for Transport
50
7.0 D
ISASSEMBLING THE
L
IEBERT
DS
FOR
T
RANSPORT
The Liebert DS has a modular frame construction that allows separating the unit into three sections.
Each of these sections is more easily maneuvered through tight spaces or placed in small elevators.
A qualified service technician with the required tools and recommended assistance can disassemble
an air-cooled unit in about four hours, assuming refrigerant evacuation is not required.
This procedure requires four or more people for lifting the filter and electric box assembly on
downflow units and for lifting the blower and electric box assembly on upflow units.
NOTICE
Risk of improper disassembly. Can cause equipment damage.
Disassembling this unit requires substantial work, including reclaiming refrigerant and
charging the unit, cutting and brazing refrigerant lines, cutting and brazing water lines,
disconnecting and reconnecting electrical lines and moving heavy, bulky equipment. One
member of the crew disassembling the unit must be qualified in wiring, brazing and
refrigeration.
Improperly disassembling or reassembling the Liebert DS may affect warranty.
7.1 Required Equipment
• Piano jacks
• Stepladder for downflow units
• Refrigeration tools
!
WARNING
Risk of explosive discharge from high-pressure refrigerant. Can cause injury or death.
This unit contains fluids and/or gases under high pressure. Relieve pressure before working
with piping, compressors or other internal components.
!
WARNING
Risk of top heavy unit falling over. Improper handling can cause equipment damage, injury,
or death.
Read all instructions before attempting to move or lift unit. Installation and service of this
equipment should be done only by properly trained and qualified personnel who have been
specially trained in the installation of air conditioning equipment.
!
CAUTION
Risk of sharp edges and heavy parts. Can cause personal injury.
Only properly trained and qualified personnel wearing appropriate safety headgear, gloves,
shoes and glasses should attempt to move, lift, remove packaging from or prepare unit for
installation.
!
CAUTION
Risk of handling heavy and lengthy parts. Can cause personal injury and equipment damage.
Cabinet panels can exceed 5ft. (1.5m) in length and weigh more than 35lb. (15.9kg). Follow
relevant OSHA lifting recommendations and consider using a two-person lift for safe and
comfortable removal and installation of cabinet panels. Only properly trained and qualified
personnel wearing appropriate safety headgear, gloves and shoes should attempt to remove or
install cabinet panels.