manualshive.com logo in svg

Emerson EZMotion, User Manual

Looking for an easier way to control your home appliances? Look no further than the Emerson EZMotion system! With our user-friendly interface and convenient features, you can effortlessly manage your devices. Download our free user manual from manualshive.com to get started today.

Share
Download
background image

74

EZMotion User/Programming Guide

www.controltechniques.com

Revision: A8

PC as part of the PowerTools Pro installation. When a new EZMotion file is created using PowerTools Pro, the contents of 
SpInitialize.ini is read and written into the configuration file.

 Figure 79:

Drive Menu Initialize View

Once the data is written from the SpInitialize.ini file into the new configuration, it is stored as part of the configuration. Therefore, if 
the file is downloaded to EZMotion, the contents of the Drive Menu Initialize view resides in the module. If the file is uploaded using 
PowerTools Pro, the contents of the SP Menu Initialization list is uploaded as part of the configuration file.

The Drive Menu Initialize data can be modified just like a user program. If the user wishes, new parameters can be added to the 
default data, or files can be removed from the default data. Changes made to the Drive Menu Initialize data in PowerTools Pro will 
change the initialization for that configuration file only (not for another new configuration created later).

If the user wishes to make a change to the initialization for every new file they create, then changes can be made directly to the 
source SpInitialize.ini file. Using a text editor (i.e. Microsoft™ Notepad), the .ini file can be modified to include new parameters or 
remove existing default parameters. Once the modified .ini file is saved, those changes will be included in every new EZMotion 
configuration file created in the future.

Care should be taken when editing the default list. Changes made to this file will directly impact the functionality of the system. It 
could be possible to cause a condition where EZMotion can not control the drive if an incorrect change is made to the initialization 
list. Consult CT Applications Engineering with questions.

8.4

Configure Setup Parameters

Following is a list of the different views in the Setup group on the hierarchy tree. The Setup group is dedicated to configuring the 
operation parameters for the system such as User Units, Position Limits, Torque Limits, Tuning Values, PLS points, etc.... To 
complete the application, start with the Setup view and work down to the last view in the Setup group (User Bits).

8.4.1

Setup View

The Setup view allows the user to setup various parameters related to how the overall system operates. Figure 80 shows an 
example of the Setup view.

Summary of Contents for EZMotion













































































































































































































































































Reviews:

No comments

Related manuals for EZMotion

Gantner E Series Communications Manual preview
E Series
Brand: Gantner Pages: 56
Hankscraft Runxin HD Series Service Manual preview
HD Series
Brand: Hankscraft Runxin Pages: 53
7th Sense medialon Showmaster Go User Manual preview
medialon Showmaster Go
Brand: 7th Sense Pages: 2
C3 Custom Coolers ROVER Owner'S Manual preview
ROVER
Brand: C3 Custom Coolers Pages: 16
IFM CR710S Original Operating Instructions preview
CR710S
Brand: IFM Pages: 49
Jäger ADwin-Gold Hardware Manual preview
ADwin-Gold
Brand: Jäger Pages: 50
Lamtec ETAMATIC Manual preview
ETAMATIC
Brand: Lamtec Pages: 136
Watts 007 Series Installation, Maintenance & Repair preview
007 Series
Brand: Watts Pages: 4
Vizio Xrt302 Manual preview
Xrt302
Brand: Vizio Pages: 65
V2 WES-EASY Manual preview
WES-EASY
Brand: V2 Pages: 48
Lantronix CWDM-CR-B Series User Manual preview
CWDM-CR-B Series
Brand: Lantronix Pages: 19
Netafim AlphaDisc BLE Quick Manual preview
AlphaDisc BLE
Brand: Netafim Pages: 4
TREND IQ422 Installation Instructions Manual preview
IQ422
Brand: TREND Pages: 12
Daikin RoCon BF Operating Instructions Manual preview
RoCon BF
Brand: Daikin Pages: 64
Qcells Q.PEAK DUO BLK ML-G10/t Series Installation And Operation Manual preview
Q.PEAK DUO BLK ML-G10/t Series
Brand: Qcells Pages: 13
Fantini Cosmi CT3MA Instruction Manual preview
CT3MA
Brand: Fantini Cosmi Pages: 25
schmersal AES 1175 Operating Instructions Manual preview
AES 1175
Brand: schmersal Pages: 6
FOR-A HVS-2000-2SI Installation Manual preview
HVS-2000-2SI
Brand: FOR-A Pages: 6

Brands by name

Popular brands

Load more brands