Emerson daniel 1500 series, User Manual

Page: 52 / 104

Lifting and installation conditions
(continued)
Table 4-1:
Conditions Description
Work area clearances and in-
stallation height restrictions Refer to
Minimum clearances for installation, operation and maintenance for
clearances.
Surface considerations Stable surface.
Soil/floor loadings and prod-
uct/piping support Follow local procedures that meet the standards for soil/floor
loading and product/piping support.
4.2 Lifting requirements for personnel
WARNING!
EQUIPMENT HANDLING AND OPERATING HAZARD
Wear personal protective equipment appropriate to the situation when working with the
turbine meter. Adhere to all safety standards and best practices for operating the equipment.
Failure to comply may result in death or serious injury.
Best lifting practices
WARNING!
LIFTING HAZARD
The lifting instructions are for installation and removal of the Daniel Liquid Turbine Meter only
and do not address lifting the turbine meter while it is attached or bolted to piping.
Failure to comply with these instructions may result in death, serious injury, or equipment
damage.
4.2.1 Equipment required to lift the turbine meter
WARNING!
CRUSHING HAZARD
During turbine meter installation or removal, always place the unit on a stable platform or
surface that supports its assembled weight.
Failure to comply could allow the turbine meter to roll, resulting in death, serious injury or
equipment damage.
Prepare the turbine meter for use
42 Daniel Series 1500 Liquid Turbine Meter, NPS 3-24