Emerson AXP640-AC2-110VAC, Installation & Use Manual

Page: 90 / 190

AXP640 Shelf Installation
AXP640 Installation and Use (6806800M24E )
90
If an ESD station is not available, you can avoid damage resulting from ESD by wearing an
antistatic wrist strap (available at electronics stores) that is attached to an active electrical
ground. Note that a shelf may not be grounded if it is unplugged.
5.4 Installing the Shelf
The AXP640 can be mounted in a 19" EIA, 23" EIA, or 600mm ETSI frame using front mounting
brackets. Using rear mounting brackets is recommended for all frame types when installed in
a Central Office Environment. Front or rear mounting brackets are not shipped with this
product. For assistance with the acquisition or design of mounting brackets for your particular
application, please contact your Emerson representative.
There is one earth ground located at the back of the shelf.
There are three ESD bonding points, two on the front and one on the back of the shelf.
Do not mount a single shelf at the top of the rack. A top-heavy rack can tip, causing damage
to equipment and injury to personnel.
Do not use the FTM handles or PEM handles for lifting the shelf.
Make sure you have the appropriate equipment to safely lift and mount the shelf securely.
To avoid personal injury or damage to the equipment, use two persons for the installation
procedure.