Emerson AXP640-AC2-110VAC, Installation & Use Manual

Page: 53 / 190

Chapter 3
AXP640 Installation and Use (6806800M24E)
53
Site Preparation
3.1 Overview
The following sections help you to prepare system installation:
3.2 Site Planning Considerations
This section provides information to prepare the site and the shelf for installation.
3.2.1 Receiving and Unpacking the System
Carefully inspect the system and all components delivered together with it.
Section Gives Information On
Site Planning Considerations This section includes information on unpacking and inspecting the
system, requirements, technical data, and other information you
need to know before you start system installation.
Site Planning Checklists This section provides checklists for site preparation.
Personal Injury or System Damage
The system is heavy and if you carry it on your own you can hurt your back.
To prevent injury, keep your back straight and have two people lift the system or use
additional lifting equipment.
Personal or System Damage
Unstable system installation in a rack can cause the rack to topple over.
Therefore, if your system is the only one in the rack, make sure to mount the system in the
lowest part of the rack. If other systems are installed in one rack, start with the heaviest
component at the bottom.
If the rack is equipped with stabilizing devices, make sure that they are installed and
extended so that the rack is secure. Then proceed to mount or service the system.
Do not tilt the system forward or backward when removing it from the system package as
the FRU ejector handles at the bottom could be damaged.