Unidrive M200-201 Quick Start Guide
37
Issue Number: 6
If the preset reference has been selected (see Pr
00.005
), the speed at which the motor runs is
determined by these parameters.
See
Drive Configuration
(00.005).
If any number other than 0 is programmed into this parameter, user security can be applied so that
no parameters except Pr
00.010
can be adjusted with the keypad. When this parameter is read via a
keypad it appears as zero. Refer to the
Drive User Guide
for further information.
Defines which value of keypad control mode reference is displayed at power-up.
Defines the mode used by the ramp system.
0:
Fast ramp
1:
Standard ramp
2:
Standard ramp with motor voltage boost
00.018 {01.021}
Preset Reference 1
RW
Num
US
OL
Ú
±
VM_SPEED_FREQ_REF Hz
Ö
0.00 Hz
RFC-A
00.025 {11.030}
User Security Code
RW
Num
ND
NC
PT
US
OL
Ú
0-9999
Ö
0
RFC-A
00.027 {01.051}
Power-up Keypad Control Mode Reference
RW
Txt
ND
NC
PT
US
OL
Ú
Reset (0), Last (1), Preset (2)
Ö
Reset (0)
RFC-A
Value
Text
Description
0
Reset
Keypad reference is zero
1
Last
Keypad reference is the last used value
2
Preset
Keypad reference is copied from
Preset Reference 1
(00.018)
00.028 {02.004}
Ramp Mode Select
RW
Txt
US
OL
Ú
Fast (0), Std (1), Std.bst (2),
Fst.bst (3)
Ö
Std (1)
RFC-A
Unidrive M200 201 Quick Start Guide English Iss6.book Page 37 Thursday, September 10, 2015 1:48 PM
