4
Unidrive M200-201 Quick Start Guide
Issue Number: 6
Declaration of Conformity
This declaration applies to the Unidrive-M product range comprising model numbers listed below:
The model number may be followed by additional characters that do not affect the ratings.
The variable speed drive products listed above have been designed and manufactured in accordance with the
following European harmonized standards:
EN 61000-3-2: 2006 Applicable where input current < 16 A. No limits apply for professional equipment where input
power
≥
1 kW.
These products comply with the Restriction of Hazardous Substances Directive - RoHS 2011/65/EU, the Low
Voltage Directive - LVD 2006/95/EC and the Electromagnetic Compatibility Directive - EMC 2004/108/EC.
These electronic drive products are intended to be used with appropriate motors, controllers, electrical
protection components and other equipment to form complete end products or systems. Compliance with
safety and EMC regulations depends upon installing and configuring drives correctly, including using the
specified input filters. The drives must be installed only by professional installers who are familiar with
requirements for safety and EMC. The assembler is responsible for ensuring that the end product or
system complies with all the relevant laws in the country where it is to be used. Refer to the User Guide. An
EMC data sheet is also available giving detailed EMC information.
Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
Moteurs Leroy-Somer
Usine des Agriers
Boulevard Marcellin Leroy
CS10015
16915 Angoulême Cedex 9
France
Model
No.
Interpretation
Format: Xaaa-bbc ddddde
Format: Xaa-bbc ddddde
X
Application
M = Manufacturing Automation, E = Elevator, F = Flow,
H = HVAC, CSD = Compressor
HS = High Speed
aa(a)
Control System 100, 101, 200, 201, 300, 400, 600, 700, 701, 702
70, 71, 72
bb
Frame Size
01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11
c
Voltage Rating
1 = 100 V, 2 = 200 V, 4 = 400 V, 5 = 575 V, 6 = 690 V
ddddd
Current Rating
Example 01000 = 100 A
e
Configuration
A = AC in AC out (with internal choke), D = DC in AC out (Inverter), C = AC in DC out
(Rectifier), E = AC in AC out (without internal choke), T = AC in AC out with Dual
Rectifier
EN 61800-5-1:2007
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements -
Electrical, thermal and energy
EN 61800-3: 2004
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific
test methods
EN 61000-6-2:2005
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for
industrial environments
EN 61000-6-4:2007
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for
industrial environments
EN 61000-3-2:2006
Electromagnetic compatibility (EMC) - Part 3-2: Limits for harmonic current emissions
(equipment input current
≤
16 A per phase)
EN 61000-3-3:2008
Electromagnetic compatibility (EMC) - Part 3-3: Limitation of voltage changes, voltage
fluctuations and flicker in public, low voltage supply systems, for equipment with rated
current
≤
16 A per phase and not subject to conditional connection
G. Williams
Vice President, Technology
Date: 30th July 2015
Place: Newtown, Powys, UK
Unidrive M200 201 Quick Start Guide English Iss6.book Page 4 Thursday, September 10, 2015 1:48 PM
