34
Unidrive M200-201 Quick Start Guide
Issue Number: 6
The rated current parameter must be set to the maximum continuous current of the motor (taken
from the name plate). The motor rated current is used in the following:
•
Current limits
•
Motor thermal overload protection
•
Vector mode voltage control
•
Slip compensation (see
Enable Slip Compensation)
•
Dynamic V/F control
Set to the rated speed of the motor (taken from the motor name plate). The motor rated speed is
used to calculate the correct slip speed for the motor.
The
Rated Voltage
(00.008) and the
Rated Frequency
(00.039) are used to define the voltage to
frequency characteristic applied to the motor. The
Rated Frequency
(00.039) is also used in
conjunction with the
Motor Rated Speed
(00.007) to calculate the rated slip for slip compensation.
Enter the motor rated power factor cos
ϕ
(taken from the motor name plate).
The drive can measure the motor rated power factor by performing a rotating autotune (see Autotune
(Pr
00.038
).
00.006 {05.007}
Motor Rated Current
RW
Num
RA
US
OL
Ú
0.00 to VM_RATED_CURRENT A
Ö
Maximum Heavy
Duty Rating A
RFC-A
00.007 {05.008}
Motor Rated Speed
RW
Num
US
OL
Ú
0.0 to 80000.0 rpm
Ö
50 Hz default: 1500.0 rpm
60 Hz default: 1800.0 rpm
RFC-A
50 Hz default: 1450.0 rpm
60 Hz default: 1750.0rpm
00.008 {05.009}
Motor Rated Voltage
RW
Num
RA
US
OL
Ú
0 to VM_AC_VOLTAGE_SET V
Ö
110 V drive: 230 V
200 V drive: 230 V
400 V drive 50 Hz: 400 V
400 V drive 60 Hz: 460 V
RFC-A
00.009 {05.010}
Motor Rated Power Factor
RW
Num
RA
US
OL
Ú
0.00 to 1.00
Ö
0.85
RFC-A
Unidrive M200 201 Quick Start Guide English Iss6.book Page 34 Thursday, September 10, 2015 1:48 PM