59
16.1 HANDLING
Due to compressor weight it is recommended to handle with compressors using
cranes and hooks.
Use of improper handling can result in person injuries.
Compressors are equipped with a hanger tab to be used for compressor manipulation.
Avoid using of hanger tab to manipulate with complete unit, once compressor is
assembled in.
Compressor must be handled in vertical position, with a maximum inclination of 15° from vertical.
Maximum running inclination of 5° from vertical is allowed.
The handling of scroll packages must be done only by forklift with due care, to
avoid damages of the package and compressors. Access is available from all four
sides of the package. It is recommended the use of forks having a length adequate
to the size of manipulated goods.
Figure
15.2.2 Single packaging
16.2 STORAGE
Failure to follow these instructions can result in property damages and people
injuries Compressors are equipped with a hanger tab to be used for compressor
manipulation.
The storage of pallets can be done by placing maximum of 1 pallet upon another;
maximum stocking allowed - 2 pallets.
Risk of pallets collapse and personal injuries, stacking higher than the recommended
maximum can cause accidents.
Move pallets, packages and compressors only with appropriate mechanical or
handling equipment according to the weight.
Keep the packages in the upright position. Keep the packaging dry at all times.
Do not stack single boxes on top of each other or on top of multi packaging.
All packages must be stored in places protected from humidity and bad weather.
Embraco does not take any responsibility for occasional damages to the package and to the finished product
resulting from not observing these instructions. For the solution of potential positioning problems during
assembling and transport, consult the Embraco Technical support team.
WARNING
WARNING
WARNING
WARNING
WARNING
16. HANDLING. TRANSPORTATION AND STORAGE
IMPORTANT
Figure
15.2.3 Packaging Barcode
