Chapter 7. Advanced Settings
Secure Connect Settings
xPoint Standard (S) Ver. 1.5 User Guide
•
69
Secure Connect Settings
If required, you can configure a secure IP-based workgroup through which
xPoint
S
will communicate.
To set a secure workgroup connection:
1. Select
Settings>Network>IP>Sec Connect
; the Secure Connect
window appears.
Figure 32. Secure Connect Settings Window
2. Select
the
Enable Secure Connect
checkbox; the following fields
become available:
o
Address
– Enter the IP address of the secure workgroup’s server
o
Group Name
– Enter the workgroup’s name
o
User Name
– Enter the user name for logging into the workgroup
server
o
Password
– Enter the password for logging into the workgroup
server.
3. Select
Apply
.
