Chapter 7. Advanced Settings
Multicast Settings
xPoint Standard (S) Ver. 1.5 User Guide
•
65
o
System Name
– Set the system DNS name used to identify the
system when using DNS dialing.
o
Ethernet Speed
– From the drop-down list, select the network
interface speed that matches your local LAN:
Ö
Auto Detect – the link type is detected automatically
Ö
100MB Full Duplex – Set the link to 100MB full duplex
Ö
100MB Half Duplex – Set the link to 100MB half duplex
Ö
10MB Full Duplex – Set the link to 10MB full duplex
Ö
10MB Half Duplex – Set the link to 10MB half duplex.
¾
Note: modify these settings only if they are required in your network.
3. Select
Apply
.
Multicast Settings
The Multicast Settings window allows you to define how multicast sessions are
initiated by xPoint
S
.
To access the multicast settings
1. Select
Settings>General>Network>Multicast
; the Multicast
Settings window appears.
