Chapter 7. Advanced Settings
Quality of Service (QoS) Settings
xPoint Standard (S) Ver. 1.5 User Guide
•
59
2.
Type in the participant MXM alias/IP number, and select
Invite
; the
call is connected.
Quality of Service (QoS) Settings
The Quality of Service (QoS) settings allow you to define the priorities by which
data packets are handled, thus adjusting the quality and priority of video/audio
on different networks with different bandwidth capacities, traffic loads, or other
limitations.
To configure the QoS definitions:
1. Select
Settings>Network>IP>QoS
; the QoS Settings window
appears.
Figure 25. QoS Settings Window
2.
In the QoS Settings window, set the following options and parameters:
o
No Priority (QoS)
– Select this option if QoS prioritization is not
required on your network. When selected, this option disables all
other options in the QoS Settings window.
o
IP Precedence
– Select this option if you want to prioritize traffic
according to IP precedence. When selected, this option makes
available the following settings:
Ö
Video Priority
–Select the video traffic prioritization method
that best suits your network:
Flash Override
,
Flash
,
Immediate
,
Priority
, or
Routine
.
Ö
Audio Priority
– Select the audio traffic prioritization method
that best suits your network:
Critical ECP
,
Flash Override
,
Flash
,
Immediate
, or
Priority
.
