EN
Visual Alarm Messages
The visual alarms are divided into three categories: Exceeding set limits, warnings, and error messages.
•
Exceeding Set Limits
The preset limit or system parameters have been exceeded. The current measured value is shown in
turn with the corresponding visual message. Due to an internal signal-size limiter, it is possible that the
actual signal at the system is different from the measured value displayed.
The color of the message and the measured value is red.
•
Warnings
System characteristics deviate from their target values, but the functionality is still sufficient. The current
measured value is shown in turn with the corresponding visual message. The color of the message and
the measured value is yellow.
•
Error Messages
A system error has occurred. The device is no longer functioning correctly! The error message is red and
no measured value is reported.
Additionally, warnings and error messages are displayed in the alarm display field (e.g.
Q1: Coupling < 50%
).
If more than one alarm source is active, then all the alarm messages are displayed one after the other.
The individual visual reports are listed on the following pages:
Field for the
alarm
SonoTT
TM
Ultrasonic FlowComputer
Copyright em-tec GmbH
D108-702 SonoTT
TM
Ultrasonic FlowComputer - Operating Instructions V4.0
•
Page 75