EN
The following fields can be accessed from all sub-menus
Home
:
Return to the
Home
menu
Zero
:
Set the zero-point for the selected measurement system
(see chapter "
Activation of the Numeric Display Mode (Numeric
“)
Speaker
:
Suppression of acoustic alarm (see chapter "Alarms and Error Messages“)
The functionality of the sub menus are described in detail in the following chapters.
6.4 Entering the Setup Mode (Setup and Settings)
The user must be sure that any changes made are appropriate for the application. In addition,
all consequences tied to activating the Aux.Cal. mode and the changes this might cause in
regard to the values must be considered prior to selecting this mode.
The user is responsible
for any hazards which will be generated by the use of
this feature. The accuracy of the measured
values should be confirmed
through an independent process.
After the activation of the
Setup
field in the
Home
menu, the
Setup
menu appears. All measurement
systems are displayed in this menu. Activating the
Enabled/Disabled
fields for the different measurement
systems, switches the respective measurement systen on and off. Activating the
Disabled/Enabled
field of
the “Acoustic Coupling Alarm“ (see chapter “Alarm- and Error messages“) disables/enables this function. If
the measurement system is not installed, the
Disabled
and
Settings
fields have gray lettering and cannot
be used. The mean measurement value for each activated measurement system is displayed in the monitor
display field. Measurement systems which are switched off (e.g.
Q2
) or not installed (e.g.
Pr
) are also shown
in gray lettering. The adjustment of the date and the time is possible by activation the
Date
or
Time
field.
Activating the
Save
field stores changes in the system and keeps them until and throughout the next power-
up sequence.
Monitor display field
The activation of the
Settings
field for the respective measurement system activates a new sub-menu in
which all system parameters are displayed.
SonoTT
TM
Ultrasonic FlowComputer
Copyright em-tec GmbH
D108-702 SonoTT
TM
Ultrasonic FlowComputer - Operating Instructions V4.0
•
Page 67