EN
1.12 Ultrasonic Safety regarding Acoustic Output
When in use, the connected SonoTT
TM
Clamp-On Transducers produce very low-power ultrasonic signals
at frequencies between 2.25 and 4 MHz. The emmited acoustic output data are declared in the technical
specifications according to
IEC 61157 2
nd
ed.
If used properly, the acoustic signals produced by the SonoTT
TM
Ultrasonic FlowComputer and sensors are,
according to current knowledge, harmless for peope and the environment.
1.13 Information regarding Alarms
The alarms are not related to physiological parameters according the
IEC60601 1-8, 2
nd
ed.
nor are they
intended to oversee other medical devices connected to the sensors.
The technical alarms are related to errors or critical states of the system identified by the electronics,
insufficient ultrasonic measurement conditions, or measurements exceeding default or user settings for
measurement thresholds.
SonoTT
TM
Ultrasonic FlowComputer
Copyright em-tec GmbH
D108-702 SonoTT
TM
Ultrasonic FlowComputer - Operating Instructions V4.0
•
Page 57