71
GB
Installation
Remove transport bolts
Take the following steps to remove the bolts:
1. Loosen 4 bolts with spanner and then remove them.
2. Plug the holes with the transport hole plugs.
3. Keep the transport bolts for future use.
Levelling the washing machine
1. Check that the feet are securely attached to the cabinet. If not, screw them fully
in and tighten the nuts.
2. Loosen the lock nuts and turn the feet until they each make contact with the
floor.
3. Adjust the legs and lock the nuts with a spanner, making sure the machine is
steady.
WARNING!
• You must remove the transport bolts from the rear
before using the product.
• You’ll need the transport bolts again if you move
the product, so make sure you keep them in a
safe place.
WARNING!
• The lock nuts on all four feet must be screwed
tightly against the housing.
1
2
3
4
