53
© 2021, Elon Group AB. All rights reserved.
The brackets must not touch the inner surfaces of the worktop after installa-
tion under any circumstances (see picture).
9.3 After installing the hob, make sure that:
• The power supply cable is not accessible through cupboard doors or drawers.
• There is adequate flow of fresh air from outside the cabinetry to the base of the hob.
• If the hob is installed above a drawer or cupboard space, a thermal protection barrier is installed below the base of the hob.
• The isolating switch is easily accessible by the customer.
9.5 Adjusting the bracket position
Fix the hob on the work surface by screwing 4 brackets on the bottom of the hob (see picture) after installation.
Adjust the bracket position to suit the thickness of the worktop that is being used.
9.4 Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls
protruding from the hob.
