44
45
© 2021, Elon Group AB. All rights reserved.
Setting more zones:
The steps for setting more zones are similar to the steps for
setting one zone;
When you set the time for several cooking zones
simultaneously, the decimal dots for the relevant cooking zones
are on. The minute display shows the minute timer. The dot for
the corresponding zone flashes.
The display appears as shown below:
3.4.9 Default working times
Auto shut down is a safety protection function for your induction
hob. It shuts down automatically if you ever you forget to turn off
the hob. The default working times for various power levels are
shown in the table below:
When the pot is removed, the induction hob should stop heating
immediately and the hob automatically switches off after 2
minutes.
3.4.8 Using the stop and go control
1. When the cooking zones are
active, touch the ” ” control, all
the displays will show ” ” and
stop heating.
In this mode only ” ” and ”
”
”Lock” control can be operated.
2. Touch ” ” again, the displays
will show the original setting, and
the cooking zones will carry on
heating.
Once the countdown timer expires, the corresponding zone will
switch off. Then it will show the new minute timer and the dot
for the corresponding zone will flash.
The display appears as shown:
Touch the heating zone selection control, the corresponding
timer will be shown in the timer indicator.
(set to 30 minutes)
Power level
Keep warm
1 2 3 4 5 6 7 8 9
Default working timer (hour)
8
8 8 8 4 4 4 2 2 2
(set to 15 minutes)
(set to 45 minutes)
