GB
76
Choosing the program
Wash cycle table
The table below shows which program is best and how much detergent is needed, depending on how dirty the dishes are.
It also shows various information about the programs.
( ) indicates that rinse aid is needed.
NOTE
:
• EN50242:
This program is the test cycle. Information for comparability test in accordance with EN 50242.
Starting a wash cycle
1. Pull out the lower and upper baskets, load the dishes and push the baskets back in.
It is recommended that you load the lower basket first, then the upper one.
2. Pour in the detergent.
3.
Insert the plug in the socket. For information on the electrical supply refer to the last page “Product fiche”.
Make sure that the water supply is turned on at full pressure.
4. Close the door and press the Power button to turn on the machine.
5. Choose a program; the indicator light will turn on. Then press the Start/Pause button; the dishwasher will start its cycle.
Description
of cycle
Detergent
Pre/Main
Running
time (min)
Energy
(kWh)
Water
(L)
Rinse
aid
Program
Intensive
Prewash (50°C)
Wash (60°C)
Rinse
Rinse
Rinse (70°C)
Drying
5/25 g
160
1,6
18,5
Normal
Prewash (45°C)
Wash (55°C)
Rinse
Rinse (65°C)
Drying
5/25 g
180
1,2
15
(*EN 50242)
Prewash
Wash (45°C)
Rinse (65°C)
Drying
5/25 g
190
0,90
11
Glass
Prewash
Wash (40°C)
Rinse
Rinse (60°C)
Drying
5/25 g
120
0,85
14,5
90 Min
Wash (65°C)
Rinse
Rinse (65°C)
Drying
30 g
90
1,35
12,5
Rapid
Wash (45°C)
Rinse
Rinse (55°C)
20 g
30
0,75
11
