GB
60
Maintenance and cleaning
Lowering the spike racks
The spikes in the lower basket are used to hold plates and
bowls.
They can be lowered to make more room for large items.
External care
The door and door seal
Clean the door seals regularly with a soft damp cloth to
remove food deposits. When the dishwasher is being
loaded, food and drink residue may drip onto the sides of
the dishwasher door. These surfaces are outside the wash
cabinet and are not reached by water from the spray arms.
Any deposits should be wiped off before the door is closed.
The control panel
If cleaning is required, the control panel should be wiped
with a soft damp cloth only.
WARNING
• To avoid penetration of water into the door lock and electrical compo-
nents, do not use a spray cleaner of any kind.
• Never use abrasive cleaners or scouring pads on the outer surfaces, as
they may scratch the finish. Some paper towels may also scratch or leave
marks on the surface.
Internal care
Filtering system
The filtering system in the base of the wash cabinet traps
coarse debris from the washing cycle. The collected debris
may cause the filters to clog. Check the condition of the
filters regularly and clean them if necessary under running
water. Follow the steps below to clean the filters in the wash
cabinet.
NOTE
:
The illustrations are only for reference; the filtering system
and spray arms may appear different on different models.
raise the spike racks
fold inwards
Hold the coarse filter and rotate it
anticlockwise to unlock the filter.
Lift the filter upwards and out of the
dishwasher.
The fine filter can be pulled off the bot
-
tom of the filter assembly. The coarse
filter can be detached from the main
filter by gently squeezing the tabs at
the top and pulling it away.
Open
1
Coarse filter
Main filter
Fine filter
2
