GB
77
Changing the program mid-cycle
A wash cycle can only be changed if it has been running for a short time, otherwise the detergent may have already been
released and the dishwasher may have already drained the wash water. If this is the case, the dishwasher needs to be reset
and the detergent dispenser must be refilled. To reset the dishwasher, follow the instructions below:
1. Open the door a little to stop the dishwasher. After the spray arm stops turning you can open the door completely.
2. Press the Program button for more than three seconds to put the appliance in standby mode.
3. You can now change the program to the desired program setting.
Forget to add a dish?
A forgotten dish can be added any time before the detergent dispenser opens. To do this, follow the instructions below:
1. Open the door a little to stop the wash cycle.
2. After the spray arm stops turning you can open the door completely.
3. Add the forgotten dishes.
4. Close the door.
5. The dishwasher will run after 10 seconds.
WARNING
It is dangerous to open the door mid-cycle, as hot steam may
scald you.
3 sec
