97
Parameter setting
Weather Station Suntracer KNX sl
• Version: 14.07.2016 • Technical changes and errors excepted.
Further parameters for the rain automation are set in the "façades" menu (see
Rain au-
tomation
, Seite 90). Rain alarm does not have any extension delay.
Set whether precipitation should trigger the rain alarm or the rain automation.
If in the event of precipitation, the
rain automation
is triggered, then set in which pe-
riods of the week and the calendar-timer, the rain movement position is to be travelled
to. The periods are defined in the menu "week timer" or "month timer" (see
Weekly tim-
er
, Seite 113 and
Calendar timer
, Seite 115).
Then also set the movement position.
Define the value of the release object for the rain automation. Using the release object,
the rain automation can be deactivated at short-notice.
Define the follow-up time The follow-up time is the delay time after the end of the pre-
cipitation warning.
Within the automation functions the rain automation has a low priority. To display the
sequence, rain automation is also listed in the
Façade X automation
without the set-
tings being possible.
6.20.2. Façade automation
Set automation for the façade
Priorities
The functions of the façade are arranged according to their priorities. First named have
higher priority. 1. Time open, 2. Outdoor temperature block, 3. Time and night closure,
Use
• No
• as rain alarm
• as rain automation
Use rain automation
with week timer
Period 1 24
No • Yes
with calendar timer
Period 1...4 Sequence 1/2
No • Yes
Movement position (in %)
0 ...100
Slat position (in %)
(only for window shades with slats)
0 ...100
Evaluation of the rain automation - release
object
1 = activated | 0 = deactivated
0 = activated | 1 = deactivated
value until first call
0 • 1
Rain automation follow-up time
in minutes
1 ... 120; 5
