104
Parameter setting
Weather Station Suntracer KNX sl
• Version: 14.07.2016 • Technical changes and errors excepted.
Select whether the ranges for the direction and height of the sun are to be specified per
parameter or via a communication object.
If the ranges are specified
by parameter
, then several ranges can be specified. Specify
the direction for the shading, either with the defined compass direction or with "angle
range" and by inputting the values exact to a degree. If the ranges are specified
by
communication object
, then only the starting values for direction and height are de-
fined, that are valid until the first call.
For sun direction and height, a fixed hysteresis of 1° is valid
Brightness value (sensor selection)
Next you select which brightness value (sensor) is to be relevant for the shading of the
façade. As a brightness value the highest value actually measured by the three internal
sensors can be used, or a value that was received via a communication object.
Specification for the ranges of
sun direction and height by
Parameter • object
Number of ranges for
sun direction and height
1 • 2 • 3
Range 1 / 2 / 3
Sun direction
(
when specified by parameter:
valid until first call)
• All sides (0° ... 360°)
• West (180° ... 360°)
• South-West (135° ... 315°)
• South (90° ... 270°)
• South-East (45° ... 225°)
• East (0° ... 180°)
• Angle range
at and above (in °)
(for angle range)
0 … 360; 90
until (in °)
(for angle range)
0 … 360; 270
Sun elevation
(
when specified by parameter:
valid until first call)
• every height (0° ... 90°)
• Angle range
at and above (in °)
(for angle range)
0 … 90
until (in °)
(for angle range)
0 … 90
Incrementally in °
(for specification by parameter)
1 ... 10; 2
Brightness sensor selection:
• Internal sensors (maximum value)
• via communication object
