115
Parameter setting
Weather Station Suntracer KNX sl
• Version: 14.07.2016 • Technical changes and errors excepted.
Set the send pattern for the week clock switch output and the value of the output.
Period that can be switched externally (time period is the input)
The time switches are taken over from an external timer switch. Set at which value the
period is to be active and define the object value before the first communication.
6.22. Calendar timer
In the calendar timer in the device, four periods with two switching sequences can be
defined. These periods are, for example, used for the internal automatic function timed
opening and timed closure (see chapter
Time open
, Seite 98 and
Time and night clo-
sure
, Seite 99).
Activate the required periods for the calendar timer. The menus for the further setting
of the computer are then loaded.
6.22.1. Calendar clock Period 1-4
Set whether the switching date and the switching time are set per object and in which
cases the switching dates and times received are to be retained. Please note that the
setting "After power restoration and programming" should not be used for the initial
start-up, as the factory settings are always used until the first call (setting via objects
is ignored).
Switching output sends
• never
• on change
• on change to active
• on change to inactive
• on change and periodically
• on change to active and periodically
• on change to inactive and periodically
Send cycle
(if sent periodically)
5 s ... 2 h; 10 s
8-bit output value if
Period active
0 ... 255
8-bit output value if
Period not active
0 ... 255
Period is active
• at object value = 1
• at object value = 0
Object value prior to initial communication
0 • 1
Use period 1
No • Yes
Use ... period
No • Yes
Use period 4
No • Yes
Use objects for switching times
No • Yes
Maintain the
