50
Setting the parameters and functions for all
Sensor with Cala KNX display
• Version: 13.03.2017 • Technical changes and errors excepted.
The possible settings on the device display are explained in the chapter
Device control
on the touch display
>
Light
, page 23.
7.5.5. Drive 1-3
The key reaction for the drive to be utilised can be adjusted for each drive operation
menu.
Insert the name to be shown on the menu page.
Determine the function, i.e. the type of drive. Then select the mode for the touch keys.
Depending on the mode, various other parameters must be set.
The other setting options correspond to those of the interface inputs. For this observe
chapter
Control modes for drive control
, page 63.
The possible settings on the device display are explained in the chapter
Device control
on the touch display
>
Drive (shading, window)
, page 25.
7.6.
Variable comparator
The integrated variable comparators can output maximum, minimum and average val-
ues.
7.6.1. Control variable comparator 1/2/3/4
Determine what the control variable comparator should output, and activate the input
objects to be used. Transmission patterns and blocks can also be set.
Repetition of the dimming command
for long key activation in 0.1 sec.
[when the dimming command is repeated]
2...50; 5
Dimming by
[when the dimming command is repeated]
100.00% • 50.00% • 25.00% • 12.50% • 6.25%
• 3.13% • 1.56%
Name
[free text]
Function
• Shutter
• Blinds
• Awning
• Window
Mode
• Standard
• Standard inverted
• Comfort mode
• Dead man’s switch
Use comparator 1/2/3/4
No • Yes
Summary of Contents for Cala KNX AQS/TH
Page 2: ......
Page 6: ...4 Clarification of signs...