25
Operating the device via the touch display
Sensor with Cala KNX display
• Version: 13.03.2017 • Technical changes and errors excepted.
(2)
If additional dimming is possible, a minus and a plus symbol are shown. Touching
the left part of the screen (-) dims down. Touching the right part (+) dims up.
(3)
Alternatively, swipe left (darker) or right (brighter) on the slider bar that is shown in
the
lower
part of the display. The slide bar position shows the current brightness of the
lamp in percent.
(4)
The dots on the lower display edge symbolise the individual menu pages in the
main menus. The currently selected position is marked in colour. Swipe to the left or
right in the
top
half of the display to show the other menu pages.
5.6.
Drive (shading, window)
Manual operation setting of shading or windows on the device is only possible if
"Drive" has been activated in the ETS setting item "Menus". The maximum number of
drive pages is three.
Menus
, page 47 and
Drive 1-3
, page 50
1
4
Fig. 17: Light menu, two areas (dimming)
3
2
Light bulb symbol
Touch areas
a
Light switch/
Dimming (marked in
red, tap)
b
slide bar (marked in
green, swipe)
Symbol
Circle
a
b
Summary of Contents for Cala KNX AQS/TH
Page 2: ......
Page 6: ...4 Clarification of signs...