48
Setting the parameters and functions for all
Sensor with Cala KNX display
• Version: 13.03.2017 • Technical changes and errors excepted.
The "Settings" menu and the control options on the device display are explained in
chapter
Operating the device via the touch display
, page 13.
7.5.1. Settings
These display pages allow setting the screen and button tone and show the device ver-
sion.
The possible settings on the device display are explained in the chapter
Device control
on the touch display
>
Device settings
, page 15.
7.5.2. Sensor system
The display page "Sensor system" shows the sensor measured values.
The possible appearance settings on the device display are explained in the chapter
Device control on the touch display
>
Sensor system (measured value display)
, page
20.
7.5.3. Temperature control
The temperature control menu is connected with the internal
temperature PI control of the device!
•
In order to show the temperature control menu,
the temperature PI control of the device must be activated.
This sub-item of the application determines the name of the menu and the functions
shown.
Insert the name to be shown on the menu page.
Decide whether the control mode is to be manually modified and if so, which modes
may be selected.
Light 3
No • Yes
Drive 1
No • Yes
Drive 2
No • Yes
Drive 3
No • Yes
Name
[free text]
Allow mode selection
No •
Yes
The following modes may be activated from the menu.
Comfort
No • Yes
Comfort extension
No • Yes
Standby
No • Yes
Eco
No • Yes
Protection
No • Yes
Summary of Contents for Cala KNX AQS/TH
Page 2: ......
Page 6: ...4 Clarification of signs...