49
Setting the parameters and functions for all
Sensor with Cala KNX display
• Version: 13.03.2017 • Technical changes and errors excepted.
Then determine the nominal values on the display that may be modified. The nominal
values may only be modified for the mode that is currently active.
The possible settings on the device display are explained in the chapter
Device control
on the touch display
>
Temperature control
, page 22.
7.5.4. Light 1-3
The interface can be adapted to the light to be switched or dimmed for every light con-
trol menu, and you can select a symbol.
Insert the name to be shown on the menu page.
Determine the type of control, i.e. whether the lamp is to be switched via one or two
areas and whether the lamp can be dimmed.
Select the symbol shown.
Determine the period of time between switching and dimming for all control types with
dimming. Short tapping means a switch command. If the finger rests on the area for
longer than the set time, dimming is initiated.
The dimming command can also be repeated, i.e. it is dimmed another level when the
area is touched for another interval. The dimming level per repetition/interval can also
be set.
The following nominal values can be set in the current mode
Comfort
No • Yes
Standby
No • Yes
Eco
No • Yes
Protection
No
(cannot be modified)
Name
[free text]
Type of control
• one area (off/on) switchable
• one area (on(off) switchable and
dimmable
• two areas (left off/right on)
switchable
• two areas (left off/right on)
swidimmable
Symbol
Circle • Light bulb
Time between switching and dimming
in 0.1 sec.
2...50; 5
Repetition of the dimming command
No •
Yes
Summary of Contents for Cala KNX AQS/TH
Page 2: ......
Page 6: ...4 Clarification of signs...