22
Operating the device via the touch display
Sensor with Cala KNX display
• Version: 13.03.2017 • Technical changes and errors excepted.
5.4.
Temperature control
The manual temperature setting on the device is only possible if "Temperature control"
has been activated in the ETS setting item "Menus".
Menus
, page 47 and
Temperature control
, page 48
.
The display page "temperature control" shows
(1)
name,
(2)
current nominal value and, if approved in the ETS, also
(3)
the current
mode.
(4)
The nominal value for the current mode can be adjusted by tapping on the minus
and/or plus symbol.
If the manual modification of the nominal value is blocked in one mode, the sym-
bol "Manual blocked" is briefly shown when an attempt is made to modify the
value.
(3)
Tapping on the mode symbol displays the temperature control modes that have
been approved for display selection in the ETS. The current mode is shown in red. In
order to select a different mode, first switch to the symbol of the desired mode by tap-
ping. Then remain on the symbol a little longer. If the button tone is active, you will
receive an acoustic feedback. The mode is now active, and the colour for this symbol
changed from white to red.
The modes change in the following sequence:
Comfort (day, present), heating and/or cooling
Standby (day, brief absence), heating and/or cooling
Eco (night), heating and/or cooling active
1
3
4
2
Fig. 14: Temperature control menu:
5
Summary of Contents for Cala KNX AQS/TH
Page 2: ......
Page 6: ...4 Clarification of signs...