47
Setting the parameters and functions for all
Sensor with Cala KNX display
• Version: 13.03.2017 • Technical changes and errors excepted.
Display
The possible settings on the device display are explained in the chapter
Device control
on the touch display
>
Device settings
, page 15.
7.4.
Button tone
The
Sensor with Cala KNX display
may output an acoustic signal as feedback if a
key on the screen is activated. The button tone may be switched on or off via an object,
in the ETS menu or on the display.
Object control
Settings via an object, i.e. via the bus, is executed with object 31 (1 = On, 0 = Off).
Activate the object controls as desired.
ETS
Set whether and/or when the ETS settings for the button tone are to remain active. Do
not use the setting "after voltage return and programming" for first commissioning.
Switch the tone on or off.
Display
The possible settings on the device display are explained in the chapter
Device control
on the touch display
Device settings
>
Button tone
, page 19.
7.5.
Menus
The
Sensor with Cala KNX display
may show display setting pages, sensor values
and various user interface areas. This is where you select the menus the user can see.
The user can call up the different menus on the display by swiping to the right or left.
If the menus for the control of the temperature, for light or drives, additional settings
appear in the application.
Use button tone object
No • Yes
The following parameters
should be maintained
• never be retained
• after power restoration
• after power restoration and
programming
Use button tone
No • Yes
Use the following menus
Settings
No • Yes
Sensor system
No • Yes
Temperature control
No • Yes
Light 1
No • Yes
Light 2
No • Yes
Summary of Contents for Cala KNX AQS/TH
Page 2: ......
Page 6: ...4 Clarification of signs...