![background image](http://html1.mh-extra.com/html/elsner-elektronik/knx-aqs-th-b-up/knx-aqs-th-b-up_installation-and-adjustment_2396600046.webp)
45
Parameter setting
Sensor KNX AQS/TH-B-UP
• as of software 3.1 • Version: 01.03.2017 • Technical changes and errors excepted.
Block
Logic outputs can also be blocked using objects.
Behaviour on release of the switching output is dependent on send behaviour
Send behaviour
• on change of logic
• on change of logic to 1
• on change of logic to 0
• on change of logic and periodically
• on change of logic to 1 and periodically
• on change of logic to 0 and periodically
• on change of logic + receipt of object
• on change of logic + receipt of object and
periodically
Send cycle
(is only sent if "periodically" is selected)
5 s • 10 s • 30 s • 1 min • … • 2 h
Analysis of the blocking object
• at value 1: block | at value 0: release
• at value 0: block | at value 1: release
Blocking object value before 1st communi-
cation
0 • 1
Behaviour of the switching output
With blocking
• do not send message
• send value for logic = 0
• send value for logic = 1
Value of the parameter
"Send behaviour":
Settings options
"Behaviour of the switching output on
release":
on change of logic
• do not send message
• send value for current logic status
on change of logic to 1
• do not send message
• if logic = 1
send value for 1
on change of logic to 0
• do not send message
• if logic = 0
send value for 0
on change of logic and periodically
send value for current logic status
(no selection)
on change of logic to 1 and periodically
if logic = 1
send value for 1
(no selection)
on change of logic to 0 and periodically
if logic = 0
send value for 0
(no selection)
on change of logic and receipt of object
• do not send message
• Status object/s send/s
on change of logic and receipt of object
and periodically
send value for current logic status
(no selection)
Summary of Contents for KNX AQS TH-B-UP
Page 5: ...4 Clarification of signs...