![background image](http://html1.mh-extra.com/html/elsner-elektronik/knx-aqs-th-b-up/knx-aqs-th-b-up_installation-and-adjustment_2396600051.webp)
50
Parameter setting
Sensor KNX AQS/TH-B-UP
• as of software 3.1 • Version: 01.03.2017 • Technical changes and errors excepted.
5.14. Pushbutton
The integrated pushbuttons can be used as bus buttons (button interface) or for setting
the temperature basic target values.
When used for temperature control, the increment per button press can be set in the
temperature PI control.
Pressing the pushbuttons at the same time switches the unit from Eco-mode tempo-
rarily into comfort mode. The delay time for manual comfort mode is also set in the
temperature PI control.
Display and operation at the device
If certain modes should not be selected using pushbuttons, these can be blocked for
manual selection here. By default, "Building protection" mode cannot be selected
("No").
Use input objects
No • Yes
Selection for content
• Do not display
• Inside temperature
• Outside temperature
• Total temperature
• Current thermostat target value
• Dewpoint temperature
• Inside relative humidity
• Outside relative humidity
• Total relative humidity
• Absolute humidity g/kg
• Absolute humidity g/m
3
• Inside CO2 reading
• Outside CO2 reading
• Total CO2 reading
• Datum
(lower case only)
• Time
• Value of 8 bit object 1/2/3
• Value of 16-bit object 1/2
(lower case
only)
• Text message 1/2
(lower case only)
Use pushbutton
• as button interface
• for temperature control
The following modes can be selected by
pushbutton:
Comfort/Standby/Eco/Building protection
No • Yes
Yes/Yes/Yes/No
Summary of Contents for KNX AQS TH-B-UP
Page 5: ...4 Clarification of signs...