![background image](http://html1.mh-extra.com/html/elsner-elektronik/knx-aqs-th-b-up/knx-aqs-th-b-up_installation-and-adjustment_2396600045.webp)
44
Parameter setting
Sensor KNX AQS/TH-B-UP
• as of software 3.1 • Version: 01.03.2017 • Technical changes and errors excepted.
5.12. Logic
Activate the logic inputs and assign object values up to 1st communication. Then, ac-
tivate the required logic outputs.
AND logic
OR logic
5.12.1. AND and/or OR logic 1/2/3/4/5/6/7/8
AND- and OR logic gates provide the same setting options. Assign the inputs to a
switching event and set the send behaviour.
If the logic output sends one 1-bit object:
If the logic output sends two 8-bit objects:
Use logic inputs
No •
Yes
Object value prior to 1. communication for:
Logic input 1... 16
0 • 1
Logic 1/2/3/4/5/6/7/8
not active • active
Logic 1/2/3/4/5/6/7/8
not active • active
1. / 2. / 3. / 4. Input
• do not use
• all switching events which are available
to the sensor (siehe
Logic output sends
• one 1-bit object • two 8-bit objects
Logic output sends
one 1 bit object
if logic = 1
object value
1 • 0
if logic = 0
object value
0 • 1
Logic output sends
two 8 bit objects
Type of objects
• Value (0 ... 255)
• Percent (0% ... 100%)
• Angle (0°... 360°)
• Scenario load (0 ... 127)
if logic = 1
object A value
Setting dependent on "type of object"
if logic = 0
object A value
Setting dependent on "type of object"
if logic = 1
object B value
Setting dependent on "type of object"
if logic = 0
object B value
Setting dependent on "type of object"
Summary of Contents for KNX AQS TH-B-UP
Page 5: ...4 Clarification of signs...