![background image](http://html1.mh-extra.com/html/elsner-elektronik/knx-aqs-th-b-up/knx-aqs-th-b-up_installation-and-adjustment_2396600052.webp)
51
Parameter setting
Sensor KNX AQS/TH-B-UP
• as of software 3.1 • Version: 01.03.2017 • Technical changes and errors excepted.
When used as a pushbutton interface, two further menus with settings options will ap-
pear.
5.14.1. Pushbutton interface 1/2
Activate the pushbutton interfaces as desired. Pushbutton interface 1 is linked to the
left-hand pushbutton, interface 2 to the right-hand button.
Select pushbutton function:
Switch:
If the pushbutton is to be used as a switch, select the function "Switch" and define
which values are sent when the button is pressed/released, and when these are sent.
Changeover switching:
If the pushbutton is to be used for changeover switching, select the function "Change-
over switching" and define which values are sent when the button is pressed/released,
and when these are sent.
Use pushbutton interface
No • Yes
Function
• Switch
• Changeover switch
• Shutter
• Roller blind
• Awning
• Window
• Dimmer
• 8-bit encoder
• 16-bit encoder
• Scenario recall
Function
Switch
Command when pressing the pushbutton
• send 0
• send 1
• Do not send message
Command when releasing the pushbutton
• send 0
• send 1
• Do not send message
Send value
• on change
• on change to 1
• on change to 0
• on change and periodically
• on change to 1 and periodically
• on change to 0 and periodically
Value send all
(is only sent if "periodically" is selected)
5 s … 2 h
Summary of Contents for KNX AQS TH-B-UP
Page 5: ...4 Clarification of signs...