![background image](http://html1.mh-extra.com/html/elsner-elektronik/knx-aqs-th-b-up/knx-aqs-th-b-up_installation-and-adjustment_2396600053.webp)
52
Parameter setting
Sensor KNX AQS/TH-B-UP
• as of software 3.1 • Version: 01.03.2017 • Technical changes and errors excepted.
Shutter, blind, awning or window control:
if you want to actuate a drive using a pushbutton, select the "shutter", "awning",
"blind", or "window" function and define the pushbutton function and control mode.
* For further details about settings, please see
Control modes for drive control
Dimmer:
If the pushbutton should be used as a dimmer, select the function "Dimmer" and define
the pushbutton function, time interval (switching/dimming) and if required, the repeat
interval for extended pressing of the pushbutton.
8 bit encoder:
If a fixed 8-bit value should be sent using the pushbutton, select the "8-bit encoder"
function and define the value to be sent
Function
Changeover switching
Command when pressing the pushbutton
• Changeover switching
• Do not send message
Command when releasing the pushbutton
• Changeover switching
• Do not send message
Function
Shutter/blind/awning/window
Pushbutton function
Up • Down
Up • Down • Up/Down
On • Off • On/Off
Open • Close • Open/
Close
(Shutter)
(Blind)
(Awning)
(Window)
Control mode*
• Standard
• Standard inverted
• Comfort mode
• Dead man’s switch
Bus function
Dimmer
Pushbutton function
Brighter • darker • Brighter/darker
Time between switching and dimming
in 0.1 seconds
1...50; 5
Repetition of the dimming command
no • yes
Repetition of the dimming command
upon extended button actuation
(only if dimmer command is repeated)
every 0.1 s... • every 2 s; every 1 s
Dimming by
(only if dimmer command is repeated)
1.50% • 3% • 6% • 12,50% • 25% • 50%
Summary of Contents for KNX AQS TH-B-UP
Page 5: ...4 Clarification of signs...