ELSA LANCOM Business 6000, Manual

Page: 68 / 174

Operating modes and functions
|
|
ELSA LANCOM Business 6000
|
68
EN
the computer will automatically request an IP address from the DHCP
server's address pool.
햵
Install the ELSA LANconfig on a computer in the network.
햶
Start the program from the 'ELSAlan' program group. When loading, the
ELSA LANconfig , will detect an unconfigured router in the network and
will launch the wizard for the basic settings.
If you have not previously used any IP addresses in your network,
select the option 'Make all settings automatically' in this wizard and
confirm your selection with
Finish in the next window.
The wizard assigns the IP address '10.0.0.1' with the netmask
'255.255.255.0' to the router and enables the DHCP server. On the
basis of this IP address, the device then determines the valid address
pool for the DHCP assignment.
In the event that IP addresses were already in use in your network
before converting to DHCP operation, select the option 'I would like
to adjust the settings manually' in the wizard. In the next window,
enter an unused IP address from the previously-used address range
and activate the DHCP server.