ELSA LANCOM Business 6000, Manual

Page: 16 / 174

Installation of hardware and software
|
|
ELSA LANCOM Business 6000
|
16
EN
3.2.1 Connecting to the local network (LAN)
Connect your ELSA LANCOM Business to the LAN. Plug the network cable
(supplied) into the 10/100Base-TX terminal of the device and into a free
network connector on your local network (or into a free socket on a hub in
your LAN). The cable for the LAN connector is labeled with a colored bend-
proof protector.
The 'LAN-Link' LED on the front side of the device indicates that a usable
connection to the LAN has been established.
If this LED does not come on, reverse the node/hub selector switch. If the LED
still does not light, there may be a problem with the network card or the
wiring.
3.2.2 Connecting to remote networks (WAN)
Depending on the model, up to three 2-Mbit interfaces are available for
connections to remote networks or the Internet:
ELSA LANCOM Business 6001
One X.21 interface for connection to an interface adapter
Ethernet (LAN)
RS232 interface
Leased-line connec-
tion (2-Mbit)
ISDN dial-up connection
G.703
(D2MU/
D2MS)
X.21 interface adapter,
2-Mbit
Connection for
power supply unit
On/off switch
gr
ee
n
re
d
bl
ue
ye
llo
w