ELSA LANCOM Business 6000, Manual

Page: 108 / 174

Operating modes and functions
|
|
ELSA LANCOM Business 6000
|
108
EN
LCR will start at the beginning after unsuccessfully trying the last
network prefix.
햵
If you have also made entries in the LCR table for holidays, open the
Public holidays list. Enter each holiday with its full date
(DD.MM.YYYY).
햶
Check the internal clock of the unit (incl. the date), to ensure that the LCR
activates the routing at the correct time (see also 'Time for the Selection'
further below).
Build the LCR table one step at a time and check your results. Open the ELSA
LANmonitor, for example, and establish connections to the remote stations
to be rerouted according to the table using the ELSA LANCAPI. Use the dialed
number to verify whether the LCR settings suit your requirements. For router
connections, check the log file for the number dialed (LANmonitor:
View
Options... Protocol Display ).
Time for the selection
It goes without saying that the internal clock of the ELSA LANCOM Business
must be set properly to ensure that the least-cost router correctly applies the
information in the table. The router can also help itself in this respect as well,
however: It can synchronize its internal clock with the time in the ISDN, either
when switched on, or during each call establishment.
햲
In ELSA LANconfig , switch to the 'Date&Time' tab in the 'Management'
configuration section.
햳
Activate the option for automatic device clock setting at each call
establishment. If you would rather enter the time manually, disable this
option.