ELSA LANCOM Business 6000, Manual

Page: 23 / 174

|
Configuration and management
23
|
ELSA LANCOM Business 6000
|
EN
area network. For the description of the basic configuration using the setup
wizard, please refer to the section 'Basic configuration under Windows with
ELSA LANconfig' on page 25.
Click on the Find button or call up the command with Device Find to
initiate a search for a new device manually. ELSA LANconfig will then prompt
for a location to search. You will only need to specify the local area network
if using the inband solution, and then you're off.
Once ELSA LANconfig has finished its search, it displays a list of all the
devices it has found, together with their names and, perhaps a description,
the IP address and its status.
Two different display options can be selected for configuring the devices with
ELSA LANconfig :
The 'Simple configuration' display shows only the settings required for
standard cases.
The 'Complete configuration' display shows all available settings. Some
of them should only be modified by experienced users.
Select the display mode in the View Options menu.
Double-clicking the entry for the highlighted device and then clicking the
Configure button or the Edit Edit Configuration File option reads the
device's current settings and displays the 'General' configuration selection.
The remainder of the program's operation is self-explanatory or you can use
the online help. You can click on the question mark top right in any window
or right-click on an unclear term at any time to call up context-sensitive help.