ELSA LANCOM Business 6000, Manual

Page: 30 / 174

Configuration and management
|
|
ELSA LANCOM Business 6000
|
30
EN
햲
So you should setup the router to connect to your provider, e.g. with the
ELSA LANconfig setup wizard.
햳
Start up ELSA LANmonitor by clicking Start Programs ELSAlan
LANmonitor . Generate a new device by selecting Device New and,
in the following window, enter the IP address of the router you wish to
monitor. If the configuration of the device is protected by password, enter
the password too.
Alternatively, you can select the device via the ELSA LANconfig and
monitor it using Options Monitor Device .
햴
ELSA LANmonitor automatically creates a new entry in the device list and
initially displays the status of the transfer channels. Start your Internet
browser and enter any web page you like.
ELSA LANmonitor now shows
a connection being established on one channel and the name of the
remote site being called. As soon as the connection is established, a plus
sign against the B channel entry indicates that further information on this
channel is available. Click on the plus sign to open a tree structure in
which you can view various information.
In this example, you can determine from the PPP protocol information the
IP address assigned to your router by the provider for the duration of the
connection and the addresses transmitted for the DNS and NBNS server.
Under the general information you can watch the transmission rates at
which data is currently being exchanged with the Internet.