ELSA LANCOM Business 6000, Manual

Page: 34 / 174

Configuration and management
|
|
ELSA LANCOM Business 6000
|
34
EN
Alternatively, enter the following command during a Telnet or terminal
connection:
passwd
You will then be prompted to enter and confirm a new password.
4.10 Trace outputs—Information for pros
Trace outputs may be used to monitor the internal processes in the router
during or after configuration. One such trace can be used to display the
individual steps involved in negotiating the PPP. Experienced users may
interpret these outputs to trace any errors occurring in the establishment of
a connection. A particular advantage of this is: The errors being tracked may
stem from the configuration of your own router or that of the remote site.
The trace outputs are slightly delayed behind the actual event, but are always
in the correct sequence. This will not usually hamper interpretation of the
displays but should be taken into consideration if making precise analyses.